中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
GB/T 32592-2023 轨道交通 受流系统 受电弓与接触网动态相互作用测量的要求和验证(中英文版) Rail transit current receiving system Requirements and verification for dynamic interaction measurement between pantograph and catenary |
|||
DL/T 735-2023 大型汽轮发电机定子绕组端部动态特性的测量及评定(中英文版) Measurement and Evaluation of Dynamic Characteristics of Stator Winding Ends of Large Turbine Generators |
|||
GB/T 41971-2022 农林拖拉机 动态噪声测量(中英文版) Agriculture and Forestry Tractor Dynamic Noise Measurement |
|||
GB/T 33521.32-2021 机械振动 轨道系统产生的地面诱导结构噪声和地传振动 第32部分:大地的动态性能测量(中英文版) Mechanical vibration—Ground-borne noise and vibration arising from rail systems—Part 32: Measurement of dynamic properties of the ground |
|||
HB 8626-2021 机载温度传感器性能测试要求 静态示值误差、恢复特性、动态响应与测温偏差(中英文版) Airborne temperature sensor performance test requirements: static indication error, recovery characteristics, dynamic response and temperature measurement deviation |
|||
JB/T 13818-2020 滚动直线导轨副 预紧拖动力动态测量与评价方法(中英文版) Rolling linear guide pair Dynamic measurement and evaluation method of preload drag force |
|||
GB/T 17213.14-2018 工业过程控制阀 第8-2部分:噪声的考虑 实验室内测量液动流流经控制阀产生的噪声(中英文版) Industrial-process control valves—Part 8-2: Noise considerations—Laboratory measurement of noise generated by hydrodynamic flow through control valves |
|||
GB/T 22159.4-2017 声学与振动 弹性元件振动-声传递特性实验室测量方法 第4部分:弹性非支撑件平动动刚度(中英文版) Acoustics and vibration―Laboratory measurement of vibro-acoustic transfer properties of resilient elements―Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion |
|||
GB/T 9109.5-2017 石油和液体石油产品动态计量 第5部分:油量计算(中英文版) Petroleum and liquid petroleum products dynamic measurement—Part 5:Calculation of oil quantities |
|||
GB/T 33511-2017 机械振动 桥梁动态测试与检测测量结果的评估(中英文版) Mechanical vibration—Evaluation of measurement results from dynamic tests and investigation on bridges |
|||
GB/T 9109.1-2016 石油和液体石油产品动态计量 第1部分:一般原则(中英文版) Dynamic measurement of petroleum and liquid petroleum products—Part 1: General principls |
|||
GB/T 17286.2-2016 液态烃动态测量 体积计量流量计检定系统 第2部分:体积管(中英文版) Liquid hydrocarbons dynamic measurement proving systems for volumetric meters—Part 2: Pipe prover |
|||
GB/T 17286.1-2016 液态烃动态测量 体积计量流量计检定系统 第1部分:一般原则(中英文版) Liquid hydrocarbons dynamic measurement proving systems for volumetric meters—Part 1: General principles |
|||
GB/T 6075.7-2015 机械振动 在非旋转部件上测量评价机器的振动 第7部分:工业应用的旋转动力泵(包括旋转轴测量)(中英文版) Mechanical vibration—Evaluation of machine vibration by measurements on non-rotating parts—Part 7: Rotodynamic pumps for industrial applications, including measurements on rotating shafts |
|||
JJF 1570-2016 现场动平衡测量分析仪校准规范(中英文版) (Calibration specification for field dynamic balance measurement analyzer) |
|||
GB/T 32592-2016 轨道交通 受流系统 受电弓与接触网动态相互作用测量的要求和验证(中英文版) Railway applications—Current collection systems—Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line |
|||
GB/T 20140-2016 隐极同步发电机定子绕组端部动态特性和振动测量方法及评定(中英文版) Measurement method and evaluation criteria of dynamic characteristic and vibration on stator end windings of cylindrical synchronous generators |
|||
GB/T 17213.8-2015 工业过程控制阀 第8-1部分:噪声的考虑 实验室内测量空气动力流流经控制阀产生的噪声(中英文版) Industrial-process control valves—Part 8-1: Noise considerations—Laboratory measurement of noise generated by aerodynamic flow through control valves |
|||
GB/T 50269-2015 地基动力特性测试规范(中英文版) Code for measurement methods of dynamic properties of subsoil |
|||
GB/T 9109.3-2014 石油和液体石油产品动态计量 第3部分:体积管安装技术要求(中英文版) Dynamic measurement of petroleum and liquid petroleum products―Part 3: Technical requirements of installation for pipe prover |
找到:39條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 |